Duct Nippers

Merchandise details

Duct Nippers
Features
・The duct nippers can cut the pillar section (up to 100mm long) between the side holes (wiring holes) of a wiring duct.
・The spring-operated handles require no pulling them back manually.
・The cutting edges are of pinching-off type that provides a smooth cut surface.
・The advantage in producing a cutting force permits a duct to be cut with a minimum force.
Application
The duct nippers are designed to cut the pillar section between the side holes (wiring holes) of a wiring duct. Besides, it can be used to cut the gates deep inside a resin product.
Safety Instructions Before using, be sure to read the instruction manual to ensure proper use of the product.
Type
How to Use　　To cut in alignment with the lower ends of side holes:
Apply the tip of one blade to the lower end of a side hole. Turn the blade toward front while lightly gripping the handles. Cut the pillar with the outer side of the blade facing straight in front.


The pillar can be cut in line with the lower ends of side holes.
▲Back to Top